Firmware Lg H502f Scatter Flash Via Flashtool For Unbrick

platform: MT6582
project: MTDTtest
storage: HW_STORAGE_EMMC
boot_channel: MSDC_0
block_size: 0x00020000
MTK Preloader file detected.
Found 4 supported eMMC CID:
 [Samsung] Q7XSAB 15010051 37585341 42xxxxxx xxxxxxxx
 [Samsung] FJW7MB 15010046 4A57374D 42xxxxxx xxxxxxxx
 [Samsung] Q72SMB 15010051 3732534D 42xxxxxx xxxxxxxx
 [Samsung] QN1SMB 15010051 4E31534D 42xxxxxx xxxxxxxx

platform: MT6582, cpu abi: armeabi-v7a
 manufacturer: LGE
 board: mt6582, name: my90ds_global_com
 brand: lge, model: LG-H502
 build id: MRA58K, version: 6.0 (MRA58K)
 build description: my90ds_global_com-user 6.0 MRA58K 161381935b259 release-keys

Connection status: EHCI:HUB:USB 2.00 High-speed
Interface: UFI High-Speed
Serial number: 0011-8079-3214
 Boot version: 1.03, FW version: 1.09 (Feb 20 2016 03:47:28)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 2.8 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
 Card/BGA: BGA (Discrete embedded) - High density MMC
 Manufacturer ID: 0x15 (Samsung)
 Product name: Q7XSAB (0x513758534142), rev: 0x08, serial number: 0x833313FF
 Manufacturing date: Agust 2013
CID: 15010051 37585341 42088333 13FF8056
CSD: D0270132 0F5903FF F6DBFFE1 8E404028
EXT_CSD revision: 1.5 (MMC v4.41)
Capacity: 7.29 GiB(7,828,668,416 bytes)
Partition info:
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 7.28 GiB(7,818,182,656 bytes)
LG-H502f_V20a Download Writing boot partition config to 0x48... Done.
 Writing preloader header...  Done.
Current partition access:
 Access to boot partition 1
 Writing PRELOADER at 0x00000000 (208 sectors)... Done in 0.025 s
Current partition access:
 Access to user area
Processing file: "MBR"...
 Writing MBR at 0x00000000 (1 sectors)... Done in 0.002 s
Processing file: "EBR1"...
 Writing EBR1 at 0x00080000 (1 sectors)... Done in 0.001 s
Processing file: "FTM"...
 Writing FTM at 0x00900000 (16384 sectors)... Done in 0.802 s
Processing file: "SECCFG"...
 Writing SECCFG at 0x02D00000 (1024 sectors)... Done in 0.060 s
Processing file: "uboot.bin"...
 Writing UBOOT at 0x02D80000 (1024 sectors)... Done in 0.049 s
Processing file: "UBOOTBAK"...
 Writing UBOOTBAK at 0x02E00000 (1024 sectors)... Done in 0.054 s
Processing file: "laf"...
 Writing LAF at 0x02E80000 (32768 sectors)... Done in 1.604 s
Processing file: "boot.img"...
 Writing BOOTIMG at 0x03E80000 (32768 sectors)... Done in 1.590 s
Processing file: "recovery.img"...
 Writing RECOVERY at 0x04E80000 (32768 sectors)... Done in 1.693 s
Processing file: "secro.img"...
 Writing SEC_RO at 0x05E80000 (12288 sectors)... Done in 0.604 s
Processing file: "logo.bin"...
 Writing LOGO at 0x06500000 (6144 sectors)... Done in 0.302 s
Processing file: "EBR2"...
 Writing EBR2 at 0x06800000 (1 sectors)... Done in 0.004 s
Processing file: "EBR3"...
 Writing EBR3 at 0x06880000 (1024 sectors)... Done in 0.058 s
Processing file: "LO_BAK_GO"...
 Writing LO_BAK_GO at 0x06900000 (6144 sectors)... Done in 0.304 s
Processing file: "EXPDB"...
 Writing EXPDB at 0x06C00000 (20480 sectors)... Done in 1.073 s
Processing file: "EKSST"...
 Writing EKSST at 0x07600000 (1024 sectors)... Done in 0.064 s
Processing file: "ENCRYPT"...
 Writing ENCRYPT at 0x07680000 (1024 sectors)... Done in 0.049 s
Processing file: "PERSIST_LG"...
 Writing PERSIST_LG at 0x07700000 (16384 sectors)... Done in 0.800 s
Processing file: "PERSIST"...
 Writing PERSIST at 0x07F00000 (12288 sectors)... Done in 0.634 s
Processing file: "MPT"...
 Writing MPT at 0x08500000 (45056 sectors)... Done in 2.233 s
Processing file: "PERSISTENT"...
 Writing PERSISTENT at 0x09B00000 (8192 sectors)... Done in 0.413 s
Processing file: "LGFOTA"...
 Writing LGFOTA at 0x09F00000 (20480 sectors)... Done in 1.408 s
Processing file: "CUST"...
 Writing CUST at 0x0A900000 (307200 sectors)... Done in 28.605 s
Processing file: "RCT"...
 Writing RCT at 0x13F00000 (2048 sectors)... Done in 0.496 s
Processing file: "FACTORY"...
 Writing FACTORY at 0x14000000 (40960 sectors)... Done in 5.998 s

LG-H502f_V20a Download

Share this post